SIM900 GSM/GPRS Module

...
Item Name SIM900 GSM/GPRS Module for Arduino
Price RM220
Description
  • For Messaging,Calling and GPRS connection
  • integrated TCP/IP protocol
  • Useful for M2M application
SIM900 Feature
  • Frequency bands: Dual band 900MHz/1800MHz
  • Transmitting power:
    • Class 4(2W) at EGSM900
    • Class 1(1W) at DCS1800
  • GPRS connectivity:
    • GPRS multi-slot class 10(default)
    • GPRS multi-slot class 8(option)
  • Operation Temperature: -30°C ~ +80°C
  • GPRS data:
    • Downlink transfer: max. 85.6kbps
    • Uplink transfer: max. 42.8kbps
    • Packet Broadcast Control Channel
Module Feature
  • Commnunication Interface:
    • UART Serial Communication
    • Support AT commands
    • Support 1200bps ~ 115200bps
    • Support debug port
  • Transmitting power:
    • Class 4(2W) at EGSM900
    • Class 1(1W) at DCS1800
  • Audio interface: 3.5mm phone jack
  • Antenna interface: SMA port
  • Power consumption: 12 ~ 90mA@12V
Download
Posted by Aidil Faiz at 21:40

Vibration Sensor Module

...
Item Name Vibration Sensor Module for Arduino
Price RM15
Description
  • Detect the vibration at module
  • Operating voltage: DC3.3V ~ 5V
  • Adjustable of sensitive level
  • Digital output:
    • 'H' for non-vibrate
    • 'L' for vibrate
  • Dimension: 3.2cm * 1.4cm
Pin Definition
  • VCC: Connect to DC3.3V ~5V
  • GND: Connect to Ground
  • DO:
    • 'H' for non-vibrate
    • 'L' for vibrate
  • AO: Not used
Posted by Aidil Faiz at 20:54

4x4 Membrane Keypad

...
Item Name Arduino 4x4 Membrane Keypad
Price RM17
Description
  • 16 Button Matrix Config.
  • Adhesive back for easy mounting
  • 0-9 # * A-D
  • 8 Pin Female Output Connector
  • Life Expectancy: 1 Million Actuations
  • Contact Bounce: <5ms
  • Circuit Rating: 35VDC, 100mA
  • Insulation Spec: 100M Ohm
Download
Posted by Makerzstudio at 00:51

Ultrasonic Sensor

...
Item Name HC-SR04 Ultrasonic For Arduino
Price RM15
Description
  • Operating voltage : +5V
  • Static current : < 2mA
  • Detection angle : < 15°
  • Range : 2cm ~ 400cm
  • Precision : 0.3cm
Pin Definition
  • VCC --> Connect To 5V
  • Trig --> Trigger Pin (Transmitter)
  • Echo --> Echo Pin (Receiver)
  • GND --> Connect TO Ground
Posted by Makerzstudio at 23:06

Soil Moisture Sensor

...
Item Name Soil Moisture Sensor For Arduino
Price RM15
Description Use to detect soil moisture
Pin Description
  • VCC: Connect to DC 3.3V ~ 5V
  • GND: Connect to Ground
  • DO: Digital output, 'H' or 'L'
  • AO: Analog output
Posted by Makerzstudio at 22:58

Mifare MFRC-522 RFID

...
Item Name RFID Reader for Arduino
Price RM35
Description
  • NXP MFRC522 chip based board
  • Operating Frequency: 13.56MHz
  • Supply Voltage: DC 3.3V
  • Operating Current: 13 ~ 26mA
  • Interface: SPI
  • Max. Data Transfer Rate: 10Mbit/s
Package Content
  • Mifare RC522 RFID x 1
  • RFID plain white card x 1
  • RFID Tag FOB x 1
Download
Posted by Makerzstudio at 22:49

PIR Sensor

...
Item Name PIR Sensor for Arduino
Price RM17
Description
  • Passive infrared sensor (PIR sensor)
  • Operating voltage: DC 4.5V ~ 5V
  • Quiescent Current: <65uA
  • Output: High = 3.3 V Low = 0V
  • Delay time: 5-200sec.(adjustable)
  • Trigger mode setting:
    • L=Not repeated(default)
    • H=Repeated
  • Block time 2.5S(default)
  • Board Dimensions 32mm x 24mm
  • Sensing Angle: < 120° cone angle
  • Operation Temp. -15 ~ +70 °C
Pin Description
  • VCC --> Connect to 3.3V ~ 5V
  • OUT --> TTL 3.3V ~ 5V
  • GND --> Connect to Ground
Download
Posted by Makerzstudio at 22:39

IR Line Tracking Sensor

...
Item Name IR Line Tracking Sensor for Arduino
Price RM15
Description
  • Power Supply: DC3.3V ~ 5V
  • Detection range: 0 ~ 3cm
  • LED indication for power (D1)
  • TTL logic output (D2)
  • Interface: 4-wires output
  • Output(digital): TTL logic
    • 'H' on Black or no obstacle
    • 'L' on White or obstacle
  • Output(analog):Anolog output between 0 ~ 5V
  • Dimension: 3.5cm x 1.5cm
Pin Definition
  • VCC --> Connect to 3.3V/5V
  • GND --> Connect to ground.
  • DO --> Digital output ('H' or 'L')
  • AO --> Analog voltage output (0 ~ 5V)
Download
Posted by Makerzstudio at 22:27

LCD 16x2

...
Item Name LCD 16x2 for Arduino
Price RM22
Description
  • Display construction: 16 Characters X 2 Lines
  • Display mode : TN/STN
  • Display Type : Positive Transflective
  • Backlight : LED (B/5.0V)
  • Driving voltage : Single power, +5V
  • Driving method : 1/16 duty, 1/5 bias
  • Data mode : 8-bit parallel
  • Dimmension : 80mm x 36mm x 14mm
Posted by Makerzstudio at 20:55

IR Obstacle Sensor

...
Item Name IR Obstacle Sensor For Arduino
Price RM15
Description
  • Power Supply: DC3.3V ~ 5V
  • Detection range: 2 ~ 80cm
  • LED indication for power and TTL logic output
  • Interface: 3-wires output
  • Output: TTL logic
    • 'H' for no obstacle
    • 'L' for obstacle detected
  • LED indication for power and TTL logic output
Pin Definition
  • VCC --> Connect to 3.3V/5V
  • GND --> Connect to ground.
  • OUT --> Digital output ('H' or 'L')
Posted by Makerzstudio at 20:46

HC-05 Bluetooth Module

...
Item Name HC-05 Master/Slave Bluetooth Module
Price RM36
Specification
  • Bluetooth module HC-05
  • Operating Supply Voltage: +3.6V ~ +5V
  • Version: Bluetooth V2.0 protocol standards
  • Interface: UART : VCC, GND, TX, RX
  • Modes: Master/Slave (AT Command to select)
  • Default setting:Slave mode, baud rate: 9600bps, password: 1234
Pin Definition
  • VCC --> Connect to DC 3.6V ~ 5V
  • GND --> Connect to ground
  • TXD --> Connect to MCU's RXD (3.3V level)
  • RXD --> Connect to MCU's TXD (3.3V level)
  • KEY(input) --> Set "HIGH" For AT Command
  • LED : 'H' for Connected; 'L' not Connected.
Download
Posted by Makerzstudio at 20:43

IR Flame Sensor

...
Item Name IR Flame Sensor for Arduino
Price RM15
Description
  • Operating voltage : DC +3.3V~5V
  • Onboard power status LED
  • Onboard sensor status LED
    • LOW: No Flame Detected
    • HIGH: Flame Detected
  • Sensitive to IR wavelength at 760 ~ 1100 nm
  • On board mounting hole
Pin Definition
  • AO - Analog output O/P voltage signal
  • GND - Ground
  • VCC - Power input, DC +3.3V~5V
Posted by Makerzstudio at 20:20

Arduino UNO

...
Item Name Arduino UNO R3
Price RM55
Description
  • Microcontroller: ATmega328
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 14 (6 PWM output)
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB (ATmega328)
  • SRAM: 2 KB (ATmega328)
  • EEPROM: 1 KB (ATmega328)
  • Clock Speed 16 MHz
Download Arduino Software Download
Posted by Makerzstudio at 20:17

Arduino Mega

...
Item Name Arduino Mega 2560 R3 Compatible
Price RM80
Description
  • Microcontroller: ATmega2560
  • Operating Voltage: 5V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins 54 (15 PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
Download Arduino Software Donwload
Posted by Makerzstudio at 20:10

Rain Sensor

...
Item Name Rain Sensor
Price RM20
Description Rain Sensor For Arduino
Pin Definition
  • VCC --> Connect to DC 3.3V ~ 5V
  • GND --> Connect to Ground
  • DO --> Digital output, 'H' or 'L'
  • AO --> Analog output
Posted by Makerzstudio at 20:04

2WD Arduino Chassis

...
Item Name 2WD Chassis Arduino
Price RM65
Description 2WD Robot Car Chassis Kit for Arduino, Robotic
Package Included
  • Car Chassis: 1pcs
  • Wheel: 2pcs
  • Geared Motor: 2pcs
  • Encoder Disc: 2pcs
  • Power Switch: 1pcs
  • Battery Holder: 1pcs
  • Fasterner: 4pcs
  • Hammer Caster: 1pcs
  • Standoff: 4pcs
  • Screws Set: 1 set
Posted by Makerzstudio at 19:49
Subscribe to: Posts (Atom)
 
2012 Makerzstudio | Blogger Templates for HostGator Coupon Code Sponsors: WooThemes Coupon Code, Rockable Press Discount Code